Separation systems for launchers
Separation systems enable to break linear or circular metallic structure.
Separation systems enable to break linear or circular metallic structure (between two stages, for example). They use rigid hermetic expansible tubes.
Initiation is performed through 8LTSH type transmission lines or 1DPWH30 type detonators.
|Type||Nominal thickness to be cut||Weight||Operating temperatures|
|8CERHL||2 x 1 mm||135 g / metre||-90°C < T < + 100°C|
|8CERHN||2 x 1.5 mm||310 g / metre||-70°C < T < + 70°C|
|8CERHM||2 x 4.5 mm||1 kg / metre||-20°C < T < + 70°C|
|8CERHP||2 x 2.5 mm||500 g / metre||-40°C < T < + 80°C|
These data are given for information only. The visitor shall apply to Dassault Aviation to make sure that the application domain of the information disseminated on this site is valid.
8CERH separation systems’ main characteristics:
|Functioning time:||< 5ms|
|Reliability, confidence level:||1-5.10-5 at 60%|
|Leakage rate:||< 10-3 to 10-6 atm.cm3/s according to the separation system type|